Road Nail Anchoring Agent is also known as structural anchoring adhesive, which is used for anchoring steel bars and bolts. Anchoring agent can be used with metal or fiberglass bolt, and it is used in underground engineering, slope support, shaft equipment installation, building component connection, equipment foundation anchoring and so on.
Anchoring agent storage and transportation:
1. The resin anchoring agent should be stored below 25 ° C, without sunlight and away from the fire source.
2. The storage period is six months below 25℃, and the expired products can continue to be used if they feel soft after inspection.
3. The anchoring agent is packed in a rigid cardboard box and bound with woven bags. Please handle it with care and do not throw it.
4. Railway transportation can be compared to the second class of flammable goods for vehicle or partial load, car transportation to prevent rain and exposure.
Use of resin anchoring agent:
A, clean the anchor hole with water or wind, put the appropriate amount of anchoring agent into the water, soak for 1-2 minutes, so as not to bubble (note: soaking time should not be too long).
B. Feed the anchoring agent into the anchor hole within the calibrated initial setting time, and then insert the anchor rod at a very fast speed.
The anchoring agent in building is also called structural anchoring adhesive, which is used for anchoring steel bars and bolts. 1. The early strength of the product is high, and the strength can reach 12-18mpa in half an hour, 25-30mpa in 4 hours, and 50-60mpa in 28 days; 2 Good construction performance, not limited by the site; 3 No corrosion effect on the steel bar, good impermeability
Hot Tags: road nail anchoring agent, China road nail anchoring agent manufacturers, factory, garden hoses, hose ferrules, flexible hose reels, hose reels, reliable hoses, quality control of mining resin bolts
