Scope of application
Waterproof Resin Anchoring Agent is not only used in shaft support, shaft installation, hydropower engineering prestressed anchor reinforcement, but also in building reinforcement, highway repair, tunnel construction, foundation rooting, equipment foundation and component anchoring and other fields have its wide application.
Construction methods
1. According to the design requirements of the anchoring agent specifications and rod length, determine the drilling depth than the full length of the rod 60~ 80mm
2. Clean the eye hole with air pressure.
3. According to the designed anchoring length, use the rod body to send the selected anchoring agent to the bottom of the hole, start the agitator to drive the rod body to rotate for 30±5 seconds, and push it to the bottom of the hole at a constant speed.
4. After removing the agitator, wedge the rod body in the hole in time, and do not shift or shake the rod body before curing, especially when installing the top eye. It is appropriate to test the anchorage force at a fast speed of 15 minutes and a moderate speed of 40 minutes.
5. The fast and medium speed are 7 minutes and 15 minutes respectively, and the supporting plate can be loaded after tightening the nut.
6. Stirring installation tool according to the site dynamic conditions, can be used pneumatic bolt mixer or electric coal drill and connector, nut can be used pneumatic plate hand or manual plate hand. If the anchor drilling machine is used, it is more convenient to drill and install the anchor at the same time.
1. The Waterproof Resin Anchoring Agent should be stored below 25 ° C, without sunlight and away from the fire source.
2. The storage period is three months below 25℃, and the expired products can continue to be used if they feel soft after inspection.
3. The anchoring agent is packed in a rigid cardboard box and bound with woven bags. Please handle it with care and do not throw it.
4. Railway transportation can be compared to the second class of flammable goods for vehicle or partial load, car transportation to prevent rain and exposure.
Packaging and storage
1. When this product is stored, attention should be paid to moisture-proof and moisture-proof shelf life of 3 months.
2, this product is packed in boxes, each box 40 or 50 or other.
Hot Tags: waterproof resin anchoring agent, China waterproof resin anchoring agent manufacturers, factory, supply chain of mining resin bolts, uv resistant hoses, shipping of mining resin bolts, mining bolt manufacturers, compliance of mining resin bolts with safety standards, large diameter hoses
